376
display ip vpn-instance
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
instance-name vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is
the VPN instance name, a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip vpn-instance to display information about VPN instances.
If you do not specify any parameter, the command displays brief information about all VPN instances.
Examples
# Display information about all VPN instances.
<Sysname> display ip vpn-instance
Total VPN-Instances configured : 2
VPN-Instance Name RD Create Time
vpn1 22:1 2008/10/13 09:32:45
vpn2 33:3 2008/10/13 09:42:59
Table 89 Command output
Field Descri
VPN-Instance Name Name of the VPN instance
RD RD of the VPN instance
Create Time Time when the VPN instance was created
# Display detailed information about a specific VPN instance.
<Sysname> display ip vpn-instance instance-name vpn1
VPN-Instance Name and ID : vpn1, 1
Create time : 2000/04/26 12:00:42
Up time : 0 days, 05 hours, 39 minutes and 30 seconds
Route Distinguisher : 100:1
To Next Page
Loading...
