295
display bgp ipv6 routing-table flap-info
Syntax
display bgp ipv6 routing-table flap-info [ regular-expression as-regular-expression | [ as-path-acl
as-path-acl-number | ipv6-address prefix-length [ longer-match ] ] [ | { begin | exclude | include }
regular-expression ] ]
View
Any view
Default level
1: Monitor level
Parameters
as-regular-expression: AS path regular expression to be matched, a string of 1 to 80 characters.
as-path-acl-number: Number of the specified AS path ACL to be matched, ranging from 1 to 256.
ipv6-address: IPv6 address of a route to be displayed.
prefix-length: Prefix length of the IPv6 address, in the range of 0 to 128.
longer-match: Matches the longest prefix.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table flap-info to display IPv6 BGP route flap statistics.
Examples
# Display IPv6 BGP route flap statistics.
<Sysname> display bgp ipv6 routing-table flap-info
BGP Local router ID is 1.1.1.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*d Network : 111:: PrefixLen : 64
From : 122::1 Flaps : 3
Duration : 00:13:47 Reuse : 00:16:36
Path/Ogn : 200?
Table 76 Command output
Field Descri
To Next Page
Loading...
Need help?
General