289
Field Description
MED Multi-Exit Discriminator.
LocPrf Local preference value.
Path AS_PATH attribute, recording the ASs the packet has passed to avoid routing loops.
PrefVal Preferred value.
Label Label
Ogn
ORIGIN attribute of the route, which can take on one of the following values:
• i—Indicates that a route is interior to the AS.
• Summary routes and the routes configured using the network command are
considered IGP routes.
• e—Indicates that a route is learned from the exterior gateway protocol (EGP).
• ?—Short for INCOMPLETE. It indicates that the origin of a route is unknown and
the route is learned by other means. BGP sets ORIGIN attribute of routes learned
from other IGP protocols to INCOMPLETE.
display bgp ipv6 routing-table as-path-acl
Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
as-path-acl-number: Number of an AS path ACL permitted by which to display routing information,
ranging from 1 to 256.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table as-path-acl to display routes filtered through the specified AS path
ACL.
Examples
# Display routes filtered through the AS path ACL 20.
<Sysname> display bgp ipv6 routing-table as-path-acl 20
To Next Page
Loading...
Need help?
General