HP 6125G - Page 299

288
Description
Use display bgp ipv6 routing-table to display IPv6 BGP routing table information.
Examples
# Display the IPv6 BGP routing table.
<Sysname> display bgp ipv6 routing-table
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED :0
Path/Ogn: i
*> Network : 40:40:: PrefixLen : 64
NextHop : 40:40::40:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
Table 73 Command output
Field Description
Local router ID Local router ID
Status codes
Status codes:
Status codes:
• * – valid—Valid route.
• ^ - VPNv4 best—Best VPNv4 route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• i – internal—Internal route.
• s –suppressed—Suppressed route.
• S – Stale—Stale route.
Origin
ORIGIN attributes:
• i – IGP—Originated in the AS.
• e – EGP—Learned through EGP.
• ? – incomplete—Learned by other means.
Network Destination network address.
PrefixLen Prefix length.
NextHop Next Hop.