12
NextHop: 2.2.2.1 Interface: Vlan-interface2
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active Adv Age: 1d00h20m52s
Tag: 0
Destination: 2.2.2.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active NoAdv Age: 1d00h20m52s
Tag: 0
For command output, see Table 2.
display ip routing-table protocol
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] protocol protocol [ inactive | verbose ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
protocol: Specifies the routing protocol. It can be bgp, direct, ospf, rip, and static.
inactive: Displays information about only inactive routes. Without this argument, the command displays
information about both active and inactive routes.
verbose: Displays detailed routing table information. Without this argument, the command displays brief
routing table information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
To Next Page
Loading...
Need help?
General