230
• The default route cost’s priority from high to low is: the cost set by the apply cost clause in the routing
policy, the one set by the default-route-advertise command and the one set by the default cost
command.
• The default route type’s priority from high to low is: the type set by the apply cost-type clause in the
routing policy, and the one set by the default-route-advertise command.
• If the always keyword is included, the default route is advertised regardless of whether it passes the
routing policy and uses the cost and type specified by the apply cost, apply cost-type clauses in the
first node of the routing policy.
Related commands: import-route.
Examples
# Generate a default route into the OSPFv3 routing domain.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] default-route-advertise always
display ospfv3
Syntax
display ospfv3 [ process-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 to display the brief information of an OSPFv3 process.
Examples
# Display brief information about all OSPFv3 processes.
<Sysname> display ospfv3
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
Graceful restart restarter enabled
Graceful restart helper enabled
Graceful restart helper srtict-lsa-checking enabled
Graceful restart interval 150 secs
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
To Next Page
Loading...
Need help?
General