214
Dest 3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2, tag 0, A, 34 Sec
Peer FE80::200:5EFF:FE04:B601 on Vlan-interface12
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2, tag 0, A, 13 Sec
Dest 3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2, tag 0, A, 13 Sec
Peer FE80::200:5EFF:FE04:3302 on Vlan-interface13
Dest 100::/32,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:3::/64,
via FE80::200:5EFF:FE04:3302, cost 2, tag 0, A, 6 Sec
Dest 4000:4::/64,
Table 43 Command output
Field Descri
Peer Neighbor connected to the interface.
Dest IPv6 destination address.
via Next hop IPv6 address.
cost Routing metric value.
tag Route tag.
Sec Time that a route entry stays in a particular state.
"A" The route is in aging state.
"S" The route is in suppressed state.
"G" The route is in Garbage-collect state.
filter-policy export (RIPng view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
View
RIPng view
Default level
2: System level
To Next Page
Loading...
