375
display fib vpn-instance ip-address
Syntax
display fib vpn-instance vpn-instance-name ip-address [ mask | mask-length ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: The VPN instance name, a case-sensitive string of 1 to 31 characters.
ip-address: Destination IP address, in dotted decimal format.
mask: Mask of the IP address, in dotted decimal format.
mask-length: Length of the IP address mask, in the range of 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display fib vpn-instance ip-address to display the FIB information that matches the specified
destination IP address in the specified VPN.
If neither the mask nor the mask-length argument is specified, the command displays the FIB information
that matches the specified destination IP address and has the longest mask in the specified VPN.
Otherwise, the command displays the FIB information that exactly matches the specified destination IP
address and mask in the specified VPN.
Examples
# Display the FIB information that matches the destination IP address 10.2.1.1 in VPN instance vpn1.
<Sysname> display fib vpn-instance vpn1 10.2.1.1
FIB entry count: 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination/Mask Nexthop Flag OutInterface InnerLabel Token
10.2.1.1/32 127.0.0.1 UH InLoop0 Null Invalid
For more information about the command output, see Table 88.
To Next Page
Loading...
