23
Description
Use reset ip routing-table statistics protocol to clear routing statistics for the routing table.
Examples
# Clear routing statistics in the routing table of VPN instance Sysname1.
<Sysname> reset ip routing-table statistics protocol vpn-instance Sysname1 all
reset ipv6 routing-table statistics
Syntax
reset ipv6 routing-table statistics protocol [ vpn-instance vpn-instance-name ] { protocol | all }
View
User view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
protocol: Clears statistics for the routing protocol, which can be bgp4+, direct, ospfv3, ripng, or static.
all: Clears statistics for all IPv6 routing protocols.
Description
Use reset ipv6 routing-table statistics to clear the route statistics of the routing table.
Examples
# Clear statistics for all routing protocols.
<Sysname> reset ipv6 routing-table statistics protocol all
To Next Page
Loading...
