377
Export VPN Targets : 100:1
Import VPN Targets : 100:1
Import Route Policy : policy3
Export Route Policy : policy2
Description : This is vpn1
Maximum Routes Limit : 12288
Interfaces : Vlan-interface10
Table 90 Command output
Field Descri
VPN-Instance Name and ID Name and ID of the VPN instance
CreateTime Time when the VPN instance was created
Up time Duration of the VPN instance
Route Distinguisher RD of the VPN instance
Export VPN Targets Export target attribute of the VPN
Import VPN Targets Import target attribute of the VPN
Import Route Policy Import routing policy of the VPN
Export Route Policy Export routing policy of the VPN
Tunnel Policy Tunneling policy of the VPN
Maximum Routes Limit Maximum number of routes of the VPN
Interfaces Interface to which the VPN instance is bound
domain-id
Syntax
domain-id domain-id [ secondary ]
undo domain-id [ domain-id ]
View
OSPF view
Default level
2: System level
Parameters
domain-id: OSPF domain ID, which can be in one of the following formats:
• Integer, in the range of 0 to 4294967295. For example, 1.
• Dotted decimal notation. For example, 0.0.0.1.
• Dotted decimal notation:16-bit user-defined number, in the range of 0 to 65535. For example,
0.0.0.1:512.
secondary: Uses the domain ID as secondary. With this keyword not specified, the domain ID configured
is primary.
To Next Page
Loading...
