149
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 30.30.30.1 0 0 300i
For description of the fields, see Table 36.
display bgp routing-table community
Syntax
display bgp routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ] * [ whole-match ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
aa:nn: Community number. Both aa and nn are in the range of 0 to 65535.
&<1-13>: Argument before it can be entered up to 13 times.
no-advertise: Displays BGP routes that cannot be advertised to any peer.
no-export: Displays BGP routes that cannot be advertised out the AS. If a confederation is configured, it
displays routes that cannot be advertised out the confederation, but can be advertised to other sub ASs
in the confederation.
no-export-subconfed: Displays BGP routes that cannot be advertised out the AS or to other sub ASs in the
configured confederation.
whole-match: Displays the BGP routes exactly matching the specified COMMUNITY attribute.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp routing-table community to display BGP routing information with the specified BGP
COMMUNITY attribute.
Examples
# Display BGP routing information with the specified BGP community.
<Sysname> display bgp routing-table community 11:22
BGP Local router ID is 10.10.10.1
To Next Page
Loading...
Need help?
General