GR status
GR status, which can be:
• GR in progress—Indicates GR is in process.
• Calculating routes—Indicates route calculation is in
process.
• Flushing LSAs—Indicates the device is flushing stale
LSA.
• Normal—Indicates the device is not in GR or Helper
status.
• Helper—Indicates the Helper status.
GR remaining time Remaining time before the GR timer expires.
Neighbor ID Router ID of the neighbor router.
Interface Outbound interface.
Instance ID Instance ID.
display ospfv3 interface
Syntax
display ospfv3 interface [ interface-type interface-number | statistic ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
statistic: Displays the interface statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 interface to display OSPFv3 interface information.
Examples
# Display OSPFv3 interface information.
<Sysname> display ospfv3 interface vlan-interface 10
Vlan-interface 10 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
To Next Page
Loading...
