8
NextHop: 10.1.3.1 Interface: Vlan-interface11
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active Adv Age: 1d00h05m31s
Tag: 0
Destination: 10.1.3.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active NoAdv Age: 1d00h05m32s
Tag: 0
For command output, see Table 2.
display ip routing-table ip-address
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address [ mask | mask-length ]
[ longer-match ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
display ip routing-table [ vpn-instance vpn-instance-name ] ip-address1 { mask | mask-length }
ip-address2 { mask | mask-length } [ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
ip-address: Specifies the destination IP address, in dotted decimal format.
mask | mask-length: Specifies the IP address mask, in dotted decimal format or represented by an
integer in the range of 0 to 32.
longer-match: Displays the route with the longest mask.
verbose: Displays detailed routing table information, including both active and inactive routes. Without
this argument, the command displays only brief information about active routes.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
To Next Page
Loading...
Need help?
General