HP 6125G - Compare-Different-As-Med (Ipv6 Address Family View); Dampening (Ipv6 Address Family View)

275
compare-different-as-med (IPv6 address family view)
Syntax
compare-different-as-med
undo compare-different-as-med
View
IPv6 address family view
Default level
2: System level
Parameters
None
Description
Use compare-different-as-med to enable the comparison of the MED for paths from peers in different
ASs.
Use undo compare-different-as-med to disable the comparison.
The comparison is disabled by default.
If several paths are available for one destination, the path with the smallest MED value is selected.
Do not use this command unless associated ASs adopt the same IGP protocol and routing selection
method.
Examples
# Enable to compare the MED for paths from peers in different ASs.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] compare-different-as-med
dampening (IPv6 address family view)
Syntax
dampening [ half-life-reachable half-life-unreachable reuse suppress ceiling | route-policy
route-policy-name ] *
undo dampening
View
IPv6 address family view
Default level
2: System level
Parameters
half-life-reachable: Half-life for reachable routes, in the range of 1 to 45 minutes. By default, the value is
15 m i nu t e s .