HP 6125G User Manual

212
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ripng interface to display the interface information of the RIPng process.
If no interface is specified, information about all interfaces of the RIPng process will be displayed.
Examples
# Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Vlan-interface11
Link Local Address: FE80::20F:E2FF:FE30:C16C
Split-horizon: on Poison-reverse: off
MetricIn: 0 MetricOut: 1
Default route: off
Summary address:
3:: 64
3:: 16
Table 42 Command output
Field Descri
p
tion
Interface-name Name of an interface running RIPng.
Link Local Address Link-local address of an interface running RIPng.
Split-horizon
Indicates whether the split horizon function is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether the poison reverse function is
enabled:
• on—Enabled.
• off—Disabled.
MetricIn/MetricOut Additional metric to incoming and outgoing routes

HP 6125G Specifications

General

Brand	HP
Model	6125G
Category	Switch
Language	English