4
State: Active Adv Age: 06h46m35s
Tag: 0
Destination: 192.168.0.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active NoAdv Age: 06h46m35s
Tag: 0
Displayed first are statistics for the whole routing table, followed by a detailed description of each route
(in sequence).
Table 2 Command output
Field Description
Destination Destination address/mask length.
Protocol Protocol that presents the route.
Process ID Process ID.
Preference Priority of the route.
Cost Cost of the route.
IpPrecedence IP precedence.
QosLcId QoS-local ID.
NextHop Address of the next hop on the route.
Interface Outbound interface for packets to be forwarded along the route.
BkNextHop Backup next hop.
BkInterface Backup outbound interface.
RelyNextHop Next hop address obtained through routing recursion.
Neighbor Neighboring address determined by routing protocol.
Tunnel ID Tunnel ID.
Label Label.
BKTunnel ID Backup tunnel ID.
BKLabel Backup label.
To Next Page
Loading...
Need help?
General