31
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 7 Command output
Field Descri
Public VPN-instance name (or Private VPN-instance
name)
The RIP process runs under a public VPN
instance./The RIP process runs under a private VPN
instance.
RIP process RIP process ID.
RIP version RIP version 1 or 2.
Preference RIP route priority.
Checkzero
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default-cost Default cost of the redistributed routes.
Summary Indicates whether route summarization is enabled.
Hostroutes Indicates whether to receive host routes.
Maximum number of balanced paths Maximum number of load balanced routes.
Update time RIP update interval.
Timeout time RIP timeout time.
Suppress time RIP suppress interval.
update output delay RIP packet sending interval.
output count Maximum number of RIP packets sent at each interval.
Garbage-collect time RIP garbage collection interval.
TRIP retransmit time
TRIP retransmit interval for sending update requests
and responses.
TRIP response packets retransmit count
Maximum retransmit times for update requests and
responses.
Silent interfaces
Number of silent interfaces, which do not periodically
send updates.
Default routes
Indicates whether a default route is sent to RIP
neighbors:
• only—Means only a default route is advertised.
• originate—Means a default route is advertised
along with other routes.
• disable—Means no default route is advertised.
Default route cost Cost of the default route.
Verify-source
Indicates whether the source IP address is checked on
the received RIP routing updates.
Networks Networks enabled with RIP.
To Next Page
Loading...
