85
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
neighbor-id: Neighbor’s router ID.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf retrans-queue to display retransmission queue information.
If no OSPF process is specified, the retransmission queue information of all OSPF processes is displayed.
Examples
# Display OSPF retransmission queue information.
<Sysname> display ospf retrans-queue
The Router's Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Retransmit list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 2.2.2.2 80000004 1
Network 12.18.0.1 2.2.2.2 80000003 1
Sum-Net 12.18.1.0 2.2.2.2 80000002 2
Table 25 Command output
Field Descri
The Router's Neighbor is Router ID Neighbor router ID
Address Neighbor interface IP address
Interface Interface address of the router
Area Area ID
Retrans List Retransmission list
Type LSA type
LinkState ID Link state ID
AdvRouter Advertising router
Sequence LSA sequence number
Age LSA age
To Next Page
Loading...
