HP MSR SERIES User Manual

104
Table 58 Configuration items
Item Descri
p
tion
AuthMode
Specify the network authentication mode, which can be:
• Open System—Open system authentication, namely, no
authentication
• Shared Key—Shared key authentication, which requires the
client and the device to be configured with the same shared
key.
• RSN+PSK—PSK authentication
CipherSuite
Set the data encryption mode, which can be:
• Clear—No encryption
• WEP—WEP encryption
• TKIP/CCMP—TKIP/CCMP encryption
Password Configure the WEP key
KeyID
There are four static keys in WEP. Their key indexes are 1, 2, 3,
and 4. The key corresponding to the specified key index will be
used for encrypting and decrypting frames.
2. Method 2
You can also enter a wireless service to specify the wireless service to be connected on the page
displayed after clicking the Connect icon of the wireless service.
Figure 94 Associating the specified wireless service
Enter the specified wireless service in the Wireless Service Name field, and click Connect. Then the
dialog box in Figure 93 appears. Set the options on the dialog box ac
cording to the specified
wireless service type.
Displaying statistics
Select Interface Setup > Wireless Service > Client Mode from the navigation tree and click Statistic
Information.
Figure 95 Displaying statistics

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English