HP MSR SERIES User Manual

211
Figure 216 IP address excluded from dynamic allocation setup
5. Configure IP addresses excluded from dynamic allocation as described in Table 108.
6. Click Apply
Table 108 Configuration items
Item Descri
p
tion
Start IP Address Specify the lowest IP address excluded from dynamic allocation.
End IP Address
Specify the highest IP address excluded from dynamic allocation.
The end IP address must not be lower than the start IP address. A higher end IP
address and a lower start IP address specify an IP address range while two identical
IP addresses specify a single IP address.
Configuring a DHCP server group
1. Select Advanced > DHCP Setup from the navigation tree
2. Click the DHCP Interface Setup tab to enter the DHCP interface setup configuration page as shown
in Figure 213.
3. Selec
t an interface that supports DHCP relay agent
4. Select the Relay option in the Type field, and then expand the Add DHCP Server Group node.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English