HP MSR SERIES - Configuring SSL VPN Resources

435
Figure 448 Certificate management page
6. Enable SSL VPN, and configure a port and a PKI domain for the SSL VPN service:
a. Select VPN > SSL VPN > Service Management from the navigation tree.
b. Select the box before Enable SSL VPN.
c. Set the port number to 443.
d. Select sslvpn as the PKI domain.
e. Click Apply.
Figure 449 SSL VPN service management page
Configuring SSL VPN resources
1. Configure a Web proxy resource named tech for the internal technology website 10.153.1.223:
a. Select VPN > SSL VPN > Resource Management > Web Proxy from the navigation tree.
b. Click Add.
The Web proxy server resource configuration page appears, as shown in Figure 450.
c. Enter the resource name tec
h.