HP MSR SERIES User Manual

403
4. Configure the predefined domain name as described in Table 175.
5. Click Apply.
Table 175 Configuration items
Item Descri
p
tion
Domain Name Enter a domain name to be issued to clients.
IP Setting Method
Select the IP setting method, including Dynamic and Static.
• Dynamic: To use this method, you also need to navigate to page Advanced > DNS
Setup > DNS Configuration to configure domain name resolution. The gateway will
first resolve the domain name to get an IP address and then issue the IP address to
clients.
• Static: To use this method, you must specify an IP address in the next field. The
gateway will issue the domain name-IP address mapping to clients.
IP
Specify an IP address for the domain name when the IP setting method is Static.
When the IP setting method is Dynamic, this IP setting does not take effect.
Configuring a resource group
1. Select VPN > SSL VPN > Resource Management > Resource Group from the navigation tree. The
Resource Group page appears.
Figure 412 Resource groups
2. Click Add to enter the page for adding a resource group.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing