HP MSR SERIES User Manual

91
Local MAC authentication configuration example
Network requirements
As shown in Figure 69, perform MAC authentication on the client.
Figure 69 Network diagram
Configuration procedure
1. Configure a wireless service:
a. Select Interface Setup > Wireless > Access Service from the navigation tree.
b. Click Add.
Figure 70 Creating a wireless service
c. Select the radio unit 1.
d. Set the service name to mac-auth.
e. Select the wireless service type clear.
f. Click Apply.
2. Configure local MAC address authentication:
After you create a wireless service, you enter the wireless service configuration page. You must
perform security setup when configuring MAC authentication.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing