HP MSR SERIES User Manual

121
Table 69 Configuration items
Item Descri
p
tion
Client Number
Users-based admission policy, namely, maximum number of clients allowed to
be connected. A client is counted only once, even if it is using both AC-VO and
AC-VI.
By default, the users-based admission policy applies, with the maximum
number of users being 20.
Channel Utilization
Channel utilization-based admission policy, namely, the rate of the medium
time of the accepted AC-VO and AC-VI traffic to the valid time during the unit
time. The valid time is the total time during which data is transmitted.
Setting radio EDCA parameters for APs
1. Select Interface Setup > Wireless > Wireless QoS from the navigation tree.
2. Click the QoS Service tab.
3. Click the icon in the Operation column for the desired radio in the list.
4. Find the priority type (AC_BK is taken for example here) to be modified in the radio EDCA list.
5. Click the corresponding icon in the Operation column.
Figure 117 Setting radio EDCA parameters
Table 70 Configuration items
Item Descri
p
tion
Radio Selected radio.
Priority type Priority type.
AIFSN Arbitration inter-frame spacing number used by the device.
TXOP Limit Transmission opportunity limit used by the device.
ECWmin Exponent form of CWmin used by the device.
ECWmax Exponent form of CWmax used by the device.
No ACK
If you select the box before No ACK, the No ACK policy is used by the device.
By default, the normal ACK policy is used by the device.
Table 71 Default radio EDCA parameters
AC TXOP Limit AIFSN
ECWmin ECWma
x
AC-BK 0 7 4 10

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English