To Next Page

To Previous Page

Ste

Remarks

2. Configuring parameters for a VLAN

interface.

Optional.

Configure an IP address and MAC address for a VLAN

interface. Select whether to enable the DHCP server function for

a VLAN interface. If yes, configure the related parameters.

You can also configure the DHCP server function in Advanced >

DHCP Setup. For more information, see "Configuring DHCP." This

chapter only describes the DHCP server configuration in the LAN

Setup module.

Creating a VLAN and its VLAN interface

Select Interface Setup > LAN Interface Setup from the navigation tree. The system goes to the default

page, VLAN Setup page.

Figure 36 VLAN setup page

Table 35 Configuration items

Item Descri

tion

VLAN Create And Remove Set the operation type to Create or Remove.

VLAN IDs

Enter the ID of the VLAN (or VLAN interface) to be created or removed. You can

create or remove multiple VLANs at a time.

Create VLAN Interface Create a VLAN interface when you create a VLAN.

Other manuals for HP MSR SERIES

Questions and Answers:

Need help?

Do you have a question about the HP MSR SERIES and is the answer not in the manual?

General