HP MSR SERIES - Verifying the Configuration

445
Figure 463 Configuring RADIUS scheme named system
3. Enable RADIUS authentication for the SSL VPN domain:
a. Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation
tree.
b. Click the RADIUS Authentication tab.
c. Select the box before Enable RADIUS authentication.
d. Click Apply.
Figure 464 Enable RADIUS authentication
Verifying the configuration
Launch a browser on a host, and enter ht tps://10.1.1.1/svpn/ in the address bar to enter the SSL VPN
login page. You can see that RADIUS authentication is the default authentication method and a
verification code is needed for login.