HP MSR SERIES User Manual

116
Figure 108 Configuring dynamic blacklist
Table 64 Configuration items
Item Descri
p
tion
Dynamic Blacklist
• Enable—Enables dynamic blacklist.
• Disable—Disables dynamic blacklist.
IMPORTANT:
Before enabling the dynamic blacklist function, select the Flood Attack Detect option
in the WIDS Setup page.
Lifetime
Configure the lifetime of the entries in the blacklist. When the lifetime of an entry
expires, the entry is removed from the blacklist.
At present, these attacks can be detected through a dynamic blacklist: Assoc-Flood, Reassoc-Flood,
Disassoc-Flood, ProbeReq-Flood, Action-Flood, Auth-Flood, Deauth-Flood and NullData-Flood.
Configuring static blacklist
On the blacklist configuration page as shown in Figure 108, select the Static tab to enter the static
blacklist configuration page, as shown in Figure 109. C
lick Add Static to enter the static blacklist
configuration page.
Figure 109 Configuring static blacklist

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing