HP MSR SERIES User Manual

340
Enabling learning of dynamic ARP entries
From the navigation tree, select Advanced > ARP Management > Dynamic Entry.
The dynamic entry management page appears, as shown in Figure 342.
Figure 342 Managing dynamic entries
• To disable all the listed interfaces from learning dynamic ARP entries, click Disable all.
• To disable specific interfaces from learning dynamic ARP entries, select target interfaces and click
Disable selected.
• To allow all the listed interfaces to learn dynamic ARP entries, click Enable all.
• To allow specific interfaces to learn dynamic ARP entries, select target interfaces and click Enable
selected.
• Click the icon of an interface.
The Modify interface config page appears, as shown in Figure 343.
Specify th
e maximum number of dynamic ARP entries that this interface can learn.
If you enter 0, the interface is disabled from learning dynamic ARP entries.
Figure 343 Modifying an interface

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing