HP MSR SERIES User Manual

29
Managing integrated services
For devices with a card installed, if the card provides the Web interface access function, after specifying
the URL address of the card on the integrated service management page, you can log in from the
integrated service management page to the Web interface of the card to manage the card.
When you are logged in to the Web interface, you are placed on the Device Info page. Click the
Integrated Service Management tab to enter the page displaying card information of the device.
Figure 15 Integrated service management
• To change the URL address of the card, click of the target card. Enter the URL address in the field
and click to apply the configuration or click to cancel the modification.
• Correctly set the URL address of the card, and then connect the card to the LAN to which the
administrator belongs. On the page as shown in Figure 15, c
lick the Manage button, a page linked
to the specified URL address pops up, and then you can log in to the Web interface of this card to
manage it.
Figure 16 Changing card URL address

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing