505
To perform a traceroute operation:
1. Log in to the Web interface, and select Other > Diagnostic Tools from the navigation tree to enter
the traceroute operation page, as shown in Figure 529.
2. Enter the destination IP address or host na
me.
3. Click Start.
You can see the result in the Summary box.
Figure 529 Traceroute configuration page
Ping operation
The Web interface does not support IPv6 ping.
To perform a ping operation:
1. Select Other > Diagnostic Tools from the navigation tree.
2. Click the Ping tab, as shown in 3.
3. Enter the destination IP address or host na
me.
4. Click Start.
You can see the result in the Summary box.
To Next Page
Loading...
