HP MSR SERIES User Manual

548
Configuring trunking mode calling
Network requirements
As shown in Figure 576, Router A and Router B are connected through an FXO trunk line. It is required
that Telephone 1111 can call telephone 2222.
Figure 576 Network diagram
Configuring Router A
# Create a local number.
1. Select Voice Management > Local Number from the navigation tree, and then click Add to access
the page for creating a local number.
Figure 577 Creating local number 1111
2. Enter 1 for Number ID.
3. Enter 1111 for Number.
4. Select subscriber-line 8/0 from the Bound Line list.
5. Enter Telephone A for Description.
6. Click Apply.
# Create a call route.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing