HP MSR SERIES User Manual

162
Figure 160 Add a blacklist entry
Table 94 Configuration items
Item Descri
p
tion
IP Address
Specify the IP address to be added to the blacklist. This IP address cannot be a
broadcast address, a class D address, a class E address, 127.0.0.0/8, or
255.0.0.0/8.
Hold Time
Configure the entry as a non-permanent entry and specify the hold time of the
blacklist entry.
Permanence Configure the entry as a permanent entry.
Viewing blacklist entries
Select Security Setup > Attack Defend > Blacklist from the navigation to view blacklist entries.
Table 95 Fields description
Field Descri
p
tion
IP Address IP address of the blacklist entry.
Add Method
The way in which the blacklist entry was added, Manual or Automatic.
• Manual: The entry was added manually or has been modified after being
added automatically.
• Automatic: The entry was added automatically by the scanning attack
protection function.
IMPORTANT:
Modifying an automatically added entry will change the type of the entry to Manual.
Start Time The time when the blacklist entry was added.
Hold Time Duration for which the blacklist entry will be held in the blacklist.
Dropped Count
Number of packets matching the blacklist entry and therefore dropped by the
device.
Configuring intrusion detection
On MSR900/20-1X routers
Select Security Setup > Attack Defend > Intrusion Detection from the navigation tree to enter the intrusion
detection configuration page, as shown in Figure 161. S
elect the box before Enable attack defense policy

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English