163
and then select the specific attack protection functions to be enabled. Then, click Apply to finish the
configuration.
Figure 161 Intrusion detection configuration page
On MSR20/30/50/93X/1000 routers
Select Security Setup > Attack Defend > Intrusion Detection to enter the page shown in Figure 162. Click
Add to enter the page for adding a new intrusion detection policy, as shown in Figure 163. S
elect an
interface and select the attack protection functions to be enabled, and then click Apply. The selected
attack protection functions will be enabled on the selected interface.
Figure 162 Intrusion detection policy list
To Next Page
Loading...
