HP MSR SERIES User Manual

142
Configuring a DMZ host
Creating a DMZ host
1. From the navigation tree, select NAT Configuration > NAT Configuration.
2. Click the DMZ HOST tab.
The DMZ host configuration page appears.
Figure 141 Creating a DMZ host
3. Configure the parameters as described in Table 86.
4. Click Add.
Table 86 Configuration items
Item Descri
p
tion
Host IP Address Specify the internal IP address of a DMZ host.
Global IP Address Specify the external IP address of a DMZ host.
Enabling DMZ host on an interface
From the navigation tree, select NAT Configuration > NAT Configuration and click the DMZ HOST tab to
enter the DMZ host configuration page as shown in Figure 141. Y
ou can enable or disable DMZ host on
interfaces.
• The icon indicates that DMZ host is disabled on the corresponding interface. Click the Enable
link next to the interface to enable DMZ host on the interface.
• The icon indicates that DMZ host is enabled on the corresponding interface. Click the Disable
link next to the interface to disable DMZ host on the interface.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English