To Next Page

To Previous Page

262

Item Descri

tion

Security Level

Set the authentication and privacy mode for SNMP traps when

the security model is selected as v3. The available security levels

are: no authentication no privacy, authentication but no privacy,

and authentication and privacy.

If you select v1 or v2c in the Security Model list, the security level

can only be no authentication no privacy, and cannot be

modified.

Displaying SNMP packet statistics

Select Advanced > SNMP from the navigation tree to enter the Setup tab page. On the lower part of the

page, you can view the SNMP statistics, as shown in Figure 265.

Figure 265 SNMP Statisti

cs page

SNMPv1/v2c configuration example

Network requirements

As shown in Figure 266, the NMS at 1.1.1.2/24 uses SNMPv1 or SNMPv2c to manage the SNMP agent

at 1.1.1.1/24, and the agent automatically sends traps to report events to the NMS.

Other manuals for HP MSR SERIES

Questions and Answers:

Need help?

Do you have a question about the HP MSR SERIES and is the answer not in the manual?

General