HP MSR SERIES User Manual

59
Item Descri
p
tion
Only Remove VLAN
Interface
Remove the VLAN interface of a VLAN without removing the VLAN.
Configuring VLAN member ports
The ports that you assign to a VLAN in the Web interface can only be set to untagged type.
The VLAN member port list displayed on the VLAN Setup page includes both tagged and untagged
member ports.
You can configure a VLAN by assigning ports to it or removing ports from it.
Select Interface Setup > LAN Interface Setup from the navigation tree. The system goes to the default
page, VLAN Setup page.
Table 36 Configuration items
Item Descri
p
tion
VLAN ID Select the ID of the VLAN that you want to assign ports to or remove ports from.
Port list Select the ports you want to add or remove.
Add Assign the selected ports to the VLAN.
Remove Remove the selected ports from the VLAN.
Configuring parameters for a VLAN interface
Select Interface Setup > LAN Interface Setup from the navigation tree, and then select the VLAN Interface
Setup tab to enter the page for configuring parameters for VLAN interfaces.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing