HP MSR SERIES User Manual

766
Figure 793 Configuring an access number
15. Type 30000 for Number ID.
16. Type 300 for Number.
17. Select play-welcome from the Bind to Menu list.
18. Click Apply.
Verifying the configuration
1. Dial the number 300 at Telephone A.
The call node plays audio file welcome.wav.
2. Dial 50# at Telephone A,
Telephone B1 rings.
Configure a secondary call on a call node (match the number
length)
Network requirements
As shown in Figure 794, configure an IVR access number and call node functions on Router B to meet the
following requirements.
• After the subscriber dials 300 (the IVR access number) from Telephone A, Router B plays the audio
file welcome.wav. Configure the number match length as 3, that is, when the subscriber dials 500
that matches number length 3, Telephone B2 rings.
• If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
input_error.wav.
• If no number is dialed at Telephone A within the timeout time, Router B plays the audio file
timeout.wav.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing