HP MSR SERIES User Manual

174
Application control configuration example
Network requirements
As shown in Figure 178, internal users access the Internet through Router. Configure application control
on Router, so that no user can use MSN.
Figure 178 Network diagram
Configuration procedure
# Load the application control file (assume that signature file p2p_default.mtd, which can prevent using
of MSN, is stored on the device).
• Select Security Setup > Application Control from the navigation tree.
• Select the Load Application tab and perform the following configurations, as shown in Figure 179.
Figure 179 Loading the application sig
nature file
• Select the From Device option, and select file p2p_default from the list.
• Click Apply. Figure 180 sho
ws the loaded applications.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing