HP MSR SERIES - Displaying Radio Statistics

123
Table 73 Default EDCA parameters for clients
AC TXOP Limit AIFSN
ECWmin ECWma
x
AC-BK 0 7 4 10
AC-BE 0 3 4 10
AC-VI 94 2 3 4
AC-VO 47 2 2 3
ECWmin cannot be greater than ECWmax.
If all clients operate in 802.11b radio mode, you are recommended to set TXOPLimit to 188 and 102 for
AC-VI and AC-VO.
If some clients operate in 802.11b radio mode and some clients operate in 802.11g radio mode in the
network, the TXOPLimit parameters in Table 73 ar
e recommended.
Once you enable CAC for an AC, it is enabled automatically for all ACs with higher priority. For example,
if you enable CAC for AC-VI, CAC is also enabled for AC-VO. However, enabling CAC for AC-VO does
not enable CAC for AC-VI.
Displaying radio statistics
1. Select Interface Setup > Wireless > Wireless QoS from the navigation tree.
2. Click the Radio Statistics tab.
3. Click a radio to see its details.
Figure 119 Displaying radio statistics
Table 74 Field description
Field Descri
p
tion
Radio interface WLAN radio interface.
Client EDCA update count Number of client EDCA parameter updates.