HP MSR SERIES User Manual

334
Configuring login control
The login control feature allows you to control Web or Telnet logins by IP address and login type.
Configuration procedure
1. Select Advanced > Access from the navigation tree.
The login control configuration page appears. The upper part of the page allows you to configure
login control rules, and the lower part displays existing login control rules.
You can also delete existing rules.
Figure 335 Login control configuration
2. To add a login control rule, configure the rule as described in Table 150 and click Apply.
3. To delete a login control rule, select the rule from the rule list and click Delete.
Table 150 Configuration items
Item Descri
p
tion
Login Type Select the login type to be restricted, Telnet, Web, or both.
User IP Address Enter an IP address and wildcard to specify the users.
IMPORTANT:
• Exclude the management IP segment from login control. Otherwise, you cannot log
in to the device.
• Do not set the wildcard to 255.255.255.255. Otherwise, no user can log in to the
device.
Wildcard

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing