HP MSR SERIES User Manual

444
Figure 461 Configuring the domain policy
2. Configure a RADIUS scheme named system:
a. Select Advanced > RADIUS from the navigation tree.
b. Click Add to enter the RADIUS scheme configuration page.
c. Enter the scheme name system.
d. In the Common Configuration area, select Extended as the supported RADIUS server type, and
select Without domain name as the username format.
e. Click the Add button in the RADIUS Server Configuration area.
On the page that appears, as shown in Figure 462, selec
t Primary Authentication Server as
the server type, select IPv4 and enter IP address 10.153.10.131, enter port number 1812,
enter the key expert, enter expert again to confirm the key, and click Apply.
The RADIUS server is then added to the RADIUS server list of the RADIUS scheme. Now, the
RADIUS scheme configuration page is shown as Figure 463.
f. Cli
ck Apply.
Figure 462 Adding a RADIUS server for the RADIUS scheme

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing