HP MSR SERIES User Manual

118
Figure 111 Network diagram
To configure user isolation:
Select Interface Setup > Wireless > Security from the navigation tree, and click the User Isolate tab.
Figure 112 Configuring user isolation
Table 67 Configuration items
Item Descri
p
tion
User Isolate
• Enable—Enables user isolation on the AP to isolate the clients associated with it
at Layer 2.
• Disable—Disables the user isolation.
By default, wireless user isolation is disabled.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing