185
Table 100 Configuration items
Item Descri
tion
Interface
This field displays the name of the interface on which user-based load sharing is
configured.
Status of
user-based-sharing
Set whether or not to enable user-based load sharing on the interface.
Bandwidth
Set the bandwidth of the interface.
The load ratio of each interface is calculated based on the bandwidth of each
interface. For example, if the bandwidth of Ethernet 0/0 and Ethernet 0/1 is set to
200 kbps and 100 kbps, respectively, the load ratio is 2:1.
To Next Page
Loading...
