HP MSR SERIES User Manual

219
Figure 224 Excluding IP addresses from dynamic allocation
Configuring the DHCP client (Router B)
To enable the DHCP client on interface Ethernet 0/1:
1. Select Advanced > DHCP Setup from the navigation tree, and then click the DHCP Interface Setup
tab.
2. Select Ethernet0/1 from the Interface list.
3. Select the Client option in the Type field.
4. Click Apply.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing