HP MSR SERIES User Manual

441
Figure 458 Adding local user usera
2. Configure user group user_gr1, assign resource group res_gr1 to the user group and add local
user usera to the user group:
a. Select VPN > SSL VPN > User Management > User Group from the navigation tree to enter the
user group list page.
b. Click Add.
The user group configuration page appears, as shown in Figure 459.
c. Enter the user
group name user_gr1.
d. Select res_gr1 on the Available Resource Groups list and click << to add it to the Selected
Resource Groups list.
e. Select usera on the Available Local Users list and click << to add the user to the Selected Local
Users list.
f. Click Apply.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing