HP MSR SERIES User Manual

457
4. Click Apply.
Table 191 Configuration items
Item Descri
p
tion
Domain Name Select the PKI domain for the certificate.
Certificate Type Select the type of the certificate to be retrieved, which can be CA or local.
Enable Offline
Mode
Select this box to retrieve a certificate in offline mode (that is, by an out-of-band means
like FTP, disk, or email).
Get File From
Device
Specify the path and name of the certificate file to import if you enable offline mode:
• If the certificate file is saved on the device, select Get File From Device and then specify
the path and name of the file on the device. If no file is specified, the system, by
default, gets the file domain-name_ca.cer (for the CA certificate) or
domain-name_local.cer (for the local certificate) under the root directory of the device.
• If the certificate file is saved on a local PC, Select Get File From PC and then specify the
path and name of the file and specify the partition that saves the file..
Get File From PC
Password
If offline mode is enabled, enter the password for protecting the private key, which was
specified when the certificate was exported.
After retrieving a certificate, click View Cert for the certificate from the PKI certificates list to display the
contents of the certificate.
Figure 477 Displaying certificate information

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing