HP MSR SERIES User Manual

611
4. Add a call route:
Specify the call route ID as 2001, the destination number as 2000123.$, and the destination
address as 1.1.1.2 on the call route configuration page.
5. Configure the call route:
a. Select Voice Management > Call Route from the navigation tree to access the call route list
page.
b. Find the call route with the ID of 2001 in the list, and click its corresponding icon to access
the advanced setting page.
c. Select 5 from the Call Route Selection Priority list.
d. Click Apply.
Figure 631 Cal route selection priority configuration page
6. Add a call route:
Specify the call route ID as 2002, the destination number as 2000....$, and the destination
address as 1.1.1.2 on the call route configuration page.
Configuring Router B
# Add a local number: specify the number ID as 2000, the number as 20001234$, and the bound line
as 1/0 on the local number configuration page.
Configuring the match order of number selection rules
The first rule is exact match, the second rule is priority, and the third rule is random selection.
Configure Router A:
1. Select Voice Management > Dial Plan > Number Match from the navigation tree to access the
page for configuring the match order of number selection rules, as shown in Figure 632.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English