726
Figure 747 FXO line delay off-hook binding configuration page
b. Select the Delay Off-hook option.
c. Select subscriber-line 3/0 from the Binding FXS Line list.
d. Click Apply.
# Configure the system to first select VoIP entity.
e. Select Voice Management > Dial Plan > Number Match from the navigation tree to access the
number match configuration page.
Figure 748 Entity type selection sequence configuration page
b. Select Enable in the Select Based on Voice Entity Type area.
c. Configure the order of the voice entities in the Selection Sequence box: the first is VoIP, the
second is POTS, the third is VoFR, and the last is IVR.
d. Click Apply.
To Next Page
Loading...
