735
Figure 757 Network diagram
Configuring Router C
# Configure the router to operate in the alone mode.
1. Select Voice Management > SIP Local Survival > Service Configuration from the navigation tree to
access the following page.
Figure 758 Configuring alone mode
2. Select Enable for Server Running State.
3. Enter 2.1.1.2 in IP Address Bound to the Server.
4. Select Alone for Server Operation Mode.
5. Click Apply.
# Configure user 1000.
6. Select Voice Management > SIP Local Survival > User Management from the navigation tree, and
click Add to access the following page.
To Next Page
Loading...
