HP MSR SERIES - Page 757

740
Figure 764 Configuring alone mode
2. Select Enable for Server Running State.
3. Enter 2.1.1.2 in IP Address Bound to the Server.
4. Select Alone for Server Operation Mode.
5. Click Apply.
# Configure user 1000.
6. Select Voice Management > SIP Local Survival > User Management from the navigation tree, and
click Add to access the following page.
Figure 765 Configuring a user
7. Enter 1000 for User ID.
8. Enter 1000 for Telephone Number.
9. Enter 1000 for Authentication Username.
10. Enter 1000 for Authentication Password.
11. Click Apply.
# Configure users with phone numbers 1111, 5000, and 5555 in the similar way.